EZYPOR® Liquid Measure
Perfect measuring device, allows safe and easy dispensing. Fits any plastic bottle with a 28 millimeter cap thread (soda bottle).
Great addition to 16 fl oz bottles of FTC Decarbonizer and Marine Diesel Stabilizer. Adds a perfect measuring device to these bottles, and allows safe and easy dispensing! So easy to use! Accurate measuring! No mess dispensing!
-
Child-proof caps
-
Fully sealed – stays on the bottle till empty
-
Excess drips go back into the bottle
-
Measures in 5 milliliter increments up to 20 milliliters
-
Re-usable – only buy it once for each product
You only need to purchase EZYPOR once. It simply screws on and replaces the original bottle cap, and it seals just as the original cap would. The caps are child proof – both where it screws onto the bottle, and also on its own cap. Fit the EZYPOR device, and gently squeeze the bottle which fills up the clear plastic chamber in 5 milliliter increments up to 20 milliliters, allowing for a precise measure.
$9.95
Once you remove the EZYPOR cap a spring loaded spout protrudes a little from the device. A non-return valve prevents the liquid returning to the bottle as you up-end the bottle to dispense the additive. This allows you to only dispense the amount of additive you’ve chosen, and no more. A very simple and easy to use device; no leaks, no drips, no dirty hands, no smells. An easy, convenient, and accurate measure for 16 fl oz FTC Decarbonizer and Marine Diesel Stabilizer
SET UP
Measure and cut the pick-up tube to the correct length for the bottle you are attaching the EZYPOR to. It’s best to make the tube just marginally longer (0.5″/13 mm) so that it extends completely to the bottom of the bottle – this ensures you can get the very last drops from the bottle as it empties.
HOW TO USE
Ensure the top cap of the EZYPOR is fitted securely. Remove the existing bottle cap and screw the EZYPOR onto the bottle. Make sure it is on tightly – it has a child-proof cap system and will turn freely once it is tightened enough. To test for leaks, ensure the top cap is screwed on securely, then gently squeeze the bottle. If no air can be heard escaping, it’s good to go.
Remove the top child-proof cap. The extension nozzle pops up to enable easy pouring into small openings.
Gently squeeze the bottle. The liquid in the bottle moves up the tube and starts to fill the reservoir. Stop squeezing when the correct level is reached (max of 20 milliliters per measure). The reservoir is marked in 5 milliliter increments to a maximum of 20 milliliters on one side, and a 1/2 fluid ounce measure on the other side.
Invert the bottle and pour out the liquid. A valve inside the EZYPOR prevents any more liquid from coming out of the bottle while it is inverted. This ensures an accurate measure.
When you return the bottle to upright, any drips get trapped by the pop-up nozzle. When the cap is replaced, the nozzle pushes down and returns the drip to the reservoir.
Replace the child proof cap, pressing down firmly to start as the spring loaded extension nozzle will resist a little. Now you’re finished – clean hands, no smell, and the right amount! Keep the EZYPOR on the bottle. It is sealed and is designed to stay on the bottle. When your product runs out, you can re-use it for the next one!
Perfect for many other applications – mixing 2-stroke engine oils, herbicides, cleaning agents, household chemicals etc! Purchase it separately, or add to shopping cart when buying our products!
* Note – If the bottle does not have a thread length of at least 1/2″ (13 millimeters), a leak can occur. In the picture, the bottle on the right hand side lacks adequate thread length and could possibly leak. To remedy this, it is recommended to use the supplied washer – place the washer inside the EZYPOR threaded section until it is snug against the bottom flat surface. Screw the EZYPOR tightly on to the bottle, and test again for air escaping as described above. Tighten as necessary.
Ensure the EZYPOR reservoir is empty and the bottle is in an upright position when storing. Where possible, especially if using with FTC Decarbonizer or Marine Diesel Stabilizer, avoid storing in direct sunlight and/or any areas with high temperature exposure as pressure in the bottle may increase, forcing pressurized liquid into the EZYPOR chamber.
If storing these products in a vehicle with the EZYPOR affixed, it is strongly recommended to store inside a sturdy, sealable plastic bag or other spill proof container.
If the EZYPOR reservoir self-fills due to high temperature and/or atmospheric pressure (altitude) changes, hold bottle upright, and slowly and carefully loosen the main, lower cap of the EZYPOR from the bottle just a little. This will allow pressure inside the bottle to be released. It is recommended to wear gloves while releasing the pressure to avoid contact with skin. Exercise caution. Do not loosen the EZYPOR top cap to relieve pressure as pressurized fluid loss will occur and staining may result. Once the pressure has released, retighten the main cap.
Note: fluid in the reservoir will not return to the bottle during this procedure.
It is important to not swap your EZYPOR from one product bottle to a different product bottle; example FTC Decarbonizer and herbicides etc. The cross contamination from product to product can have an unintended harmful effect on the components the product comes in contact with. We strongly recommend having one EZYPOR for each individual product, and just swapping to the replacement product bottle when needed.
Disclosure: Combining chemicals can be dangerous! It is NOT RECOMMENDED to use the same EZYPOR for dispensing different chemicals. Chemical resistance is based on use of common domestic liquids and fuel additives. Although industrial chemicals may be used with EZYPOR, no guarantee is offered and must be tested prior to use.
Disclaimer – By purchasing the product the buyer agrees that Maxodyne LLC or EZYPOR (NZ) Ltd. cannot be held responsible for possible resulting harm to humans or appliances, as neither Maxodyne LLC or EZYPOR (NZ) Ltd. have control over the actions of the purchaser or user.
No Interest! No Fees!* So Easy!
With Klarna you can pay in 4 interest-free installments over 6 weeks.
Split the cost of your purchase into 4 equal payments over 6 weeks that are automatically charged to your card every 2 weeks.
How it works
- Use your own valid debit or credit card to pay (no prepaid cards).
- The initial installment is charged when we complete your order (this is usually the shipping date).
- One of the remaining installments is automatically charged to your card every 14 days after your first payment.
- There are no interest charges with Pay in 4 installments, and no fees* when you follow your automatic payment schedule.
What to do –
At Checkout
- As usual, enter your card billing address, your contact telephone number, and email address, and a shipping address if it is different from your billing address. You will need a valid phone number that can receive text messages as Klarna will text you a security code which you must enter to complete the transaction.
- Choose Yes or No for Unattended Delivery Authority.
- Select the option “Buy now, pay later”
- Click the “I have read and agree to the website Store Policy“ check box.
- Click Place Order.
- Follow the instructions provided.
- Click on Text me the code.
- Enter the code you receive.
- You may be asked to confirm your identity by entering your birth date etc.
- Then just submit the order. Done! It’s that easy!
- We will pack and ship your order within 1 business day (we try to ship the same business day).
When the order is shipped
After we confirm that the order is on its way, Klarna will charge your card for the first installment amount. Klarna will send you a notification once the payment has been processed.
Every 2 weeks
Every 14 days Klarna will automatically charge your card one of the remaining installments until the full order amount has been paid. You will be informed ahead of time.
*No fees when you pay on time
USA Lower 48 States – From our facility in Utah, we ship daily using FedEx Standard Express as our main shipping contractor. Orders are shipped within 1 business day of receipt, and delivery is within 3 business days*. Shipping is free within the lower 48 States for orders over $50.^˜
Please note, FedEx will not deliver to USPS P.O. Box numbers as per USPS guidelines. Please provide a physical street address for shipping/delivery.
Alaska, Hawaii and Canada – we ship to Alaska, Hawaii and Canada at a subsidized rate. Shipping rates are added automatically at Checkout. All prices are in U.S. Dollars. GST & Duties/Fees may apply to Canadian purchases, payable by the purchaser as calculated by CBSA at time of entry.
Canadian customers – if it helps, we can also ship to any USA destination (Lower 48 States) for local pick-up or on-forwarding by a carrier of your choice; for example, you may have your own preferred carrier from the USA to Canada. Free shipping applies to destinations within the Lower 48 States. Ask us for details.
International Orders – We welcome our International customers! Please Contact Us for a shipping cost quote and further instructions about completing your purchase.
Please note – due to certain logistics and Federal Regulations, we are unable to ship to some Countries/Territories.
Need your product in a hurry?! Utilizing the services of FedEx and UPS, we can priority ship your product to your chosen destination*. Just contact us, tell us where you need it and when – we can then calculate the cost and advise you of the shipping details. All prices are in U.S. Dollars.
*We reserve the right to use other shipping suppliers and services as we deem necessary from time to time, depending on prevailing circumstances. Delivery schedules may be affected by conditions beyond our control.
^A $10 shipping charge applies for orders below $50 excluding tax.
˜Applies to retail quantities only. For commercial quantities, please contact us for further details.