Overheating Value Packā„¢

Why do many engines continue to overheat, especially when there’s no loss of coolant/antifreeze, and it runs fine until more power is required, e.g hitching up a trailer, climbing a mountain range, or increasing the cruising speed a bit? Why does your transmission get so hot when you push it just a little more? Before you spend big dollars fitting –

  • larger radiators with hi-flow cores
  • larger cooling fans
  • extra oil cooler kits
  • performance thermostats

Try a simple though highly effective solution to your engine and/or transmission/driveline overheating problem. Give the Overheating Value Pack a try. You’ll save money and time!

The Overheating Value Pack combines 3 effective products to address the basics of often ignored problems of overheating, including –

  • Blocked radiator tubes, scale and rust build up in the engine’s cooling system
  • Heavily contaminated oil – a major cause of component overheating
  • Sludge and hard carbon on oil-wetted surfaces, causing heat to be retained
  • Frictional heat build-up – increases engine temperature dramatically

The pack contains:

RMI-25 Cooling System Treatment – a very low-cost, extremely effective defense against cooling system failure in all engines. It is a total pour in/drive-away system which extends antifreeze effectiveness, cleans rust and scale, prevents water pump and radiator failure, non-toxic, non-hazardous.

AW10 Antiwear – provides a massive strength increase to engine, transmission, and hydraulic oils. Consequently, there is a huge reduction in frictional heat generation in engines, transmissions, differentials, etc.

Flushing Oil Concentrate – dissolves and suspends contaminants, hard carbon and sludge, allowing lubricating oil to flow more freely, dissipating heat, effectively resulting in cooler running temperatures and longer service life. Use at time of oil change.

Save money by purchasing these products at a discounted combination Value Pack price!

4 Value Pack sizes to choose from…

Overheating Value Pack

Maxodyne Overheating Value Pack Small

Maxodyne Overheating Value Pack – Small

The Overheating Value Pack has been put togetherĀ to correct the often overlooked, yet very common overheating problems engines and transmissions etc. have due to oil and cooling system issues. Before you spend big dollars fitting larger radiators with hi-flow cores, larger cooling fans, extra oil cooler kits, or performance thermostats, try a simple though highly effective solution. Give the Overheating Value Pack a try. You’ll save money and time!

An often-ignored major cause of overheating

The Overheating Value Pack combines 3 robust products to address the basics of often-ignored problems of overheating arising from oil and cooling system related issues.

  1. Rust, scale and corrosion in the cooling system. A 1/16th-inch layer of rust is capable of cutting an engine’s ability to dissipate heat by as much as 40%. If an engine’s cooling system cannot adequately dissipate that heat because of corrosion or deposit build-up, serious damage can be done to internal engine parts. Water pumps, radiators, heater control valves, and head gaskets etc. are all costly to replace, both in terms of financial and downtime costs.

An engine’s cooling system is often neglected until it becomes a high-cost problem.

RMI-25 Cooling System Treatment – is a low-cost, effective safeguard against cooling system failure. It actually cleans while the engine operates. It inhibits rust, cavitation erosion, electrolysis and pitting. It lubricates water pump seals and thermostats, and it improves cooling properties of the coolant. There is no downtime – just pour it in the radiator and run the engine. RMI-25 should be in every water-cooled engine.

  1. Contaminated oil. Heavily contaminated oil is a major cause of component overheating, especially when the contaminants have formed sludge and hard carbon on oil-wetted surfaces, causing heat to be retained rather than dissipated through the oil. When the oil, whether it be engine, transmission, hydraulic, or differential oil is badly contaminated, frictional heat within the oil is increased dramatically. This causes component temperature to increase excessively, inducing premature wear, deterioration, and subsequent component failure.

The condition of lubricating oil greatly affects temperature and component life.

Flushing Oil Concentrate – safely dissolves and suspends contaminants, hard carbon and sludge, allowing lubricating oil to flow more freely, dissipating heat, effectively resulting in cooler running temperatures and longer service life. Use at time of oil change.

AW10 Antiwear – provides a massive strength increase to engine, transmission and hydraulic oils,Ā resulting in a huge reduction in frictional heat generation, allowing components to remain much cooler, dramatically increasing the service life of the component.

Invest in this very effective product combination – save on the individual purchase cost and save on costly and time consuming repairs resulting from often ignored and hard to find engine, transmission, and driveline overheating problems!

This Value Pack is available in 4 different size combinations:

Mini Pack contains –

  • 8 fl oz RMI-25
  • 16 fl oz AW10 Antiwear
  • 8 fl oz Flushing Oil Concentrate

This pack has been developed to suit most small to medium vehicles/machines having up to approximately 16 quarts (4 gallons/19 liters) of engine oil capacity, and larger capacity transmissions and multiple differentials. 8 fl oz of RMI-25 will treat up to 5 gallons cooling system capacity. Typical vehicles/machines include most passenger cars, 4-wheel drives, many small to medium size pick-up trucks, small agricultural tractors, Bobcats/skidsteers, and similar machines, etc.

Small Pack contains –

  • 8 fl oz RMI-25
  • 32 fl oz AW10 Antiwear
  • 8 fl oz Flushing Oil Concentrate

This Pack is cost effective and suitable for medium vehicles/engines with an engine oil capacity of up to 16 quarts (4 gallons/19 liters). With this Pack, these vehicles or machines can achieve numerous engine oil flushes with the Flushing Oil Concentrate (depending, of course, on engine oil capacity) and have enough AW10 Antiwear to treat the entire oil-lubricated parts of the vehicle – engine, transmission/transaxle, differentials, and transfer case if applicable. 8 fl oz of Ā RMI-25 will treat up to 5 gallons cooling system capacity. Not only is this Pack particularly popular with many Four-Wheel Drive enthusiasts who often push their vehicles to the limits in extremely harsh conditions, but it is a ā€˜must-haveā€˜ for operators of medium size pick-up trucks that regularly tow large trailers and 5th wheels. These products really help keep temperatures under control in the engine, transmission (automatic or manual) and differentials, and ensure reliable performance under very heavy working conditions! Typical vehicles/machines include many medium size pick-up trucks, medium size agricultural machines and other off-road vehicles, and similar machines, etc.

Medium Pack contains –

  • 16 fl oz RMI-25
  • 32 fl oz AW10 Antiwear
  • 16 fl oz Flushing Oil Concentrate

This Pack can adequately treat a wide variety of vehicles and machines. There is enough RMI-25 to treat a cooling system up to 8 gallons, and enough Flushing Oil Concentrate to adequately flush up to 32 quarts (8 gallons/38 liters) engine oil capacity, and enough AW10 Antiwear to treat a combination of engines, transmissions, differentials, final drives, and hydraulics on many heavy duty, hardworking vehicles and machines.

Large Pack contains –

  • 32 fl oz RMI-25
  • 1 gallon AW10 Antiwear
  • 32 fl oz Flushing Oil Concentrate

This very popular Pack is just right for all larger vehicles/engines with an engine oil capacity of up to 64 quarts (16 gallons/76 liters), and large capacity transmissions (automatic or manual), differentials, final drives, transfer cases, and hydraulics. This Pack is appropriate for large heavy duty, hard-working vehicles and machinery, e.g. full-size trucks, 18-Wheelers, earthmoving and excavating machinery, cranes, large off-road machines, construction vehicles, etc.

 

(32 fl oz = 946 mL, 1 liter = 33.8 fl oz)

Cleaner & Cooler Cummins

Clean oil on dipstick
…the oil on the dipstick stayed really clean – never seen that before…

“I used the Flushing Oil Concentrate in my 1997 Dodge Ram Cummins. Amazing result! The oil on the dipstick stayed really clean – never seen that before. And it runs a lot cooler now, especially when towing the 5th wheel. Many thanks!”

Dana Z, Santaquin, UT

RMI-25 saved a core

RMI-25Ā really is a great product! Saved me from doing a core!”

Ben B, Westfield, MA

Performs exceptionally well

“Received theĀ RMI-25 Cooling System TreatmentĀ very quickly! Product performs exceptionally well. Using in a stand alone 300 Hp Cummins engine for farm irrigation.Ā Core of radiator is visibly cleaner after 20 hours of use. Great product! Thanks.”

Ray F, Dover, FL

It works

RMI-25 8oz"TheĀ RMI-25 Cooling System Cleaner and TreatmentĀ works likeĀ you say it will. Many thanks."

Jack C, Saint Helens, OR

Couldn’t believe it

“TheĀ RMI-25Ā worked great, couldn’t believeĀ how quickly it cleaned the reservoir. Going to flush and re-add in two weeks, seems very promising. Don’t like off the shelf products, spent a good hour or two finding the best all around coolant additive and cleaner, that’s how I found you guys andĀ RMI-25. Thank you for taking the time to legitimately respond to my questions. It was extremely helpful. I will definitely be keeping in touch, passing the info along, and orderingĀ the other products you also recommended.”

Jake V, Green Bay, WI

RMI-25 worked perfectly

Thank You! TheĀ RMI-25Ā worked perfectly.

Keith S, Coplay, PA

A great product RMI-25

“Shipped super quickly! I’ve usedĀ RMI-25Ā before, its a great product.”

Mark S, Merritt Island, FL

No Interest!Ā  No Fees!*Ā  So Easy!

With Klarna you can pay in 4 interest-free installments over 6 weeks.

Split the cost of your purchase into 4 equal payments over 6 weeks that are automatically charged to your card every 2 weeks.

How it works

  • Use your own valid debit or credit card to pay (no prepaid cards).
  • The initial installment is charged when we complete your order (this is usually the shipping date).
  • One of the remaining installments is automatically charged to your card every 14 days after your first payment.
  • There are no interest charges with Pay in 4 installments, and no fees* when you follow your automatic payment schedule.

What to do –

At Checkout

  1. As usual, enter your card billing address, your contact telephone number, and email address, and a shipping address if it is different from your billing address. You will need a valid phone number that can receive text messages as Klarna will text you a security code which you must enter to complete the transaction.
  2. Choose Yes or No for Unattended Delivery Authority.
  3. Select the option “Buy now, pay later”
  4. Click the “I have read and agree to the website Store Policy check box.
  5. Click Place Order.
  6. Follow the instructions provided.
  7. Click on Text me the code.
  8. Enter the code you receive.
  9. You may be asked to confirm your identity by entering your birth date etc.
  10. Then just submit the order. Done! It’s that easy!
  11. We will pack and ship your order within 1 business day (we try to ship the same business day).

When the order is shipped

After we confirm that the order is on its way, Klarna will charge your card for the first installment amount. Klarna will send you a notification once the payment has been processed.

Every 2 weeks

Every 14 days Klarna will automatically charge your card one of the remaining installments until the full order amount has been paid. You will be informed ahead of time.

 

*No fees when you pay on time

Do I pay Sales Tax on my order?

U.S. orders: When ordered directly from maxodyne.com website or phone-in order –

No Sales Tax is payable on orders with a Delivery Address outside of Utah.

Orders with a Delivery Address within Utah are currently subject to a Sales & Use Tax charge of 7.45% of the product price, i.e. Product cost = $100, Sales & Use Tax = $7.45.
Sales & Use Tax charges are automatically calculated and applied at the point of Checkout.

Shipping charges, if any, are not subject to Sales Tax.

International orders: When ordered directly from maxodyne.com website or phone-in order –

No U.S. Sales Tax charge applies to orders with a Delivery Address outside of the U.S.A.

There may be Duties and/or Fees applied to your order by your destination country’s Customs and Import Authority. These fees, as calculated by the local Customs Authority, are payable by the Purchaser/Importer at the time of Customs Entry.

USA and CanadaUSA Lower 48 States – From our facility in Utah, we ship daily using FedEx Standard Express as our main shipping contractor. Orders are shipped within 1 business day of receipt, and delivery is within 3 business days*. Shipping is free within the lower 48 States for orders over $50.^˜

Please note, FedEx will not deliver to USPS P.O. Box numbers as per USPS guidelines. Please provide a physical street address for shipping/delivery.

Alaska, Hawaii and Canada – we ship to Alaska, Hawaii and Canada at a subsidized rate. Shipping rates are added automatically at Checkout. All prices are in U.S. Dollars. GST & Duties/Fees may apply to Canadian purchases, payable by the purchaser as calculated by CBSA at time of entry.

Canadian customers – if it helps, we can also ship to any USA destination (Lower 48 States) for local pick-up or on-forwarding by a carrier of your choice; for example, you may have your own preferred carrier from the USA to Canada. Free shipping applies to destinations within the Lower 48 States. Ask us for details.

International Orders – We welcome our International customers! Please Contact Us for a shipping cost quote and further instructions about completing your purchase.
Please note – due to certain logistics and Federal Regulations, we are unable to ship to some Countries/Territories.

Need your product in a hurry?! Utilizing the services of FedEx and UPS, we can priority ship your product to your chosen destination*. Just contact us, tell us where you need it and when – we can then calculate the cost and advise you of the shipping details. All prices are in U.S. Dollars.

 

*We reserve the right to use other shipping suppliers and services as we deem necessary from time to time, depending on prevailing circumstances. Delivery schedules may be affected by conditions beyond our control.
^A $10 shipping charge applies for orders below $50 excluding tax.
˜Applies to retail quantities only. For commercial quantities, please contact us for further details.